Frequently Asked Questions

How long does assembly take

Assembly time varies with vehicle size. Once you know the correct number of panels required a full layout can be assembled in a few minutes.

Do I need tools

No tools are needed. TMAT connects by hand and does not require drilling or modifying the vehicle.

Do I need to modify my vehicle

No. TMAT is placed directly on to a covered or enclosed cargo surface and requires no permanent changes to the vehicle.

Can TMAT be removed and reused

Yes. TMAT can be removed in sections and placed into another vehicle or cargo area. Different vehicles may require a different number of panels.

How heavy is TMAT

A typical panel weighs around two hundred grams. A full layout varies depending on coverage but is light enough for easy handling.

How do I clean TMAT

Remove the panels and wash with a hose and mild soap. A gentle pressure rinse is also suitable if required.

Can TMAT be used in utes with hard lids canopies or enclosed areas

Yes. TMAT is suited to enclosed tubs canopies wagons vans campers and enclosed trailers.

Can TMAT be used in an open tray

TMAT is designed for enclosed and covered cargo areas. Use in an open tray requires extra caution because items may be exposed to wind and weather. TMAT should not be used as the only layout system in an open tray while the vehicle is moving.

Can TMAT be used with the tailgate down

TMAT should not be used with the tailgate down while the vehicle is moving because items may be exposed to wind and movement.

Can I use TMAT in a trailer or van

Yes. TMAT works well in enclosed trailers and vans. The system allows items to be arranged in clear repeatable positions inside the load area.

Is TMAT a load restraint system

No. TMAT is an organisation and layout system only. It does not restrain cargo and does not replace approved tie down points cargo barriers or restraint equipment.

Do I still need tie down straps

Yes. Any item that requires restraint must be tied down using approved tie down points and rated straps in accordance with Australian road and workplace regulations.

Can I drive wheeled equipment over TMAT

Yes when TMAT is installed on a solid supported floor such as a vehicle tub or trailer base. TMAT should not extend beyond a solid supporting surface.

Can TMAT be cut to size

TMAT panels should not be cut. Panels are designed to work in their original form to maintain structural integrity and proper fit.

Is TMAT suitable for commercial fleet use

Yes. TMAT is used in many trade and commercial applications where predictable layout and easy organisation is important.